dmesg - Western Digital WD1200JD-00G
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000076ffffff] usable
BIOS-e820: [mem 0x0000000077000000-0x000000007effffff] reserved
BIOS-e820: [mem 0x000000007f000000-0x000000007fdeffff] usable
BIOS-e820: [mem 0x000000007fef0000-0x000000007fef2fff] ACPI NVS
BIOS-e820: [mem 0x000000007fef3000-0x000000007fefffff] ACPI data
BIOS-e820: [mem 0x00000000e0000000-0x00000000e1ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-73PVM-S2H/GA-73PVM-S2H, BIOS F3 11/07/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7fdf0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07FF00000 mask FFFF00000 write-through
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f4d30-0x000f4d3f] mapped at [ffff8800000f4d30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
[mem 0x7fa00000-0x7fbfffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x7f000000-0x7f9fffff]
[mem 0x7f000000-0x7f9fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x76ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x76ffffff] page 2M
init_memory_mapping: [mem 0x7fc00000-0x7fdeffff]
[mem 0x7fc00000-0x7fdeffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
RAMDISK: [mem 0x35a02000-0x36cf8fff]
ACPI: RSDP 00000000000f6630 000014 (v00 GBT )
ACPI: RSDT 000000007fef3040 000034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 000000007fef30c0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 000000007fef3180 0052C6 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 000000007fef1800 000040
ACPI: HPET 000000007fef85c0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 000000007fef8640 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 000000007fef84c0 000098 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fdeffff]
Initmem setup node 0 [mem 0x00000000-0x7fdeffff]
NODE_DATA [mem 0x7fdeb000-0x7fdeffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880075000000-ffff880076ffffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0x76ffffff]
node 0: [mem 0x7f000000-0x7fdeffff]
On node 0 totalpages: 490893
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7608 pages used for memmap
DMA32 zone: 486896 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0x77000000-0x7effffff]
e820: [mem 0x7ff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007fa00000 s86336 r8192 d24256 u524288
pcpu-alloc: s86336 r8192 d24256 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483200
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1894296K/1963572K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 69276K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1866.695 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.39 BogoMIPS (lpj=7466780)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7466.78 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7fef0000-0x7fef2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:33:02, date: 08/20/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
acpi PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [10de:07c1] type 00 class 0x060000
pci 0000:00:00.1: [10de:07cb] type 00 class 0x050000
pci 0000:00:01.0: [10de:07cd] type 00 class 0x050000
pci 0000:00:01.1: [10de:07ce] type 00 class 0x050000
pci 0000:00:01.2: [10de:07cf] type 00 class 0x050000
pci 0000:00:01.3: [10de:07d0] type 00 class 0x050000
pci 0000:00:01.4: [10de:07d1] type 00 class 0x050000
pci 0000:00:01.5: [10de:07d2] type 00 class 0x050000
pci 0000:00:01.6: [10de:07d3] type 00 class 0x050000
pci 0000:00:02.0: [10de:07d6] type 00 class 0x050000
pci 0000:00:03.0: [10de:07d7] type 00 class 0x060100
pci 0000:00:03.1: [10de:07d8] type 00 class 0x0c0500
pci 0000:00:03.1: reg 0x10: [io 0xc000-0xc03f]
pci 0000:00:03.1: reg 0x20: [io 0x1c00-0x1c3f]
pci 0000:00:03.1: reg 0x24: [io 0x1c80-0x1cbf]
pci 0000:00:03.1: PME# supported from D3hot D3cold
pci 0000:00:03.2: [10de:07d9] type 00 class 0x050000
pci 0000:00:03.4: [10de:07c8] type 00 class 0x050000
pci 0000:00:04.0: [10de:07fe] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xe5108000-0xe5108fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:056a] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xe5107000-0xe51070ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:056c] type 00 class 0x01018a
pci 0000:00:08.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:09.0: [10de:07fc] type 00 class 0x040300
pci 0000:00:09.0: reg 0x10: [mem 0xe5100000-0xe5103fff]
pci 0000:00:09.0: PME# supported from D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [10de:056d] type 01 class 0x060401
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:056e] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:056f] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:056f] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:0e.0: [10de:07f4] type 00 class 0x010601
pci 0000:00:0e.0: reg 0x10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io 0xdc00-0xdc0f]
pci 0000:00:0e.0: reg 0x24: [mem 0xe5104000-0xe5105fff]
pci 0000:00:0f.0: [10de:07dc] type 00 class 0x020000
pci 0000:00:0f.0: reg 0x10: [mem 0xe5109000-0xe5109fff]
pci 0000:00:0f.0: reg 0x14: [io 0xe000-0xe007]
pci 0000:00:0f.0: reg 0x18: [mem 0xe510a000-0xe510a0ff]
pci 0000:00:0f.0: reg 0x1c: [mem 0xe5106000-0xe510600f]
pci 0000:00:0f.0: supports D1 D2
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: System wakeup disabled by ACPI
pci 0000:00:10.0: [10de:07e1] type 00 class 0x030000
pci 0000:00:10.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
pci 0000:00:10.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:10.0: reg 0x1c: [mem 0xe3000000-0xe3ffffff 64bit]
pci 0000:00:10.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:07.0: [104c:8024] type 00 class 0x0c0010
pci 0000:01:07.0: reg 0x10: [mem 0xe5004000-0xe50047ff]
pci 0000:01:07.0: reg 0x14: [mem 0xe5000000-0xe5003fff]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:0a.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0xe5000000-0xe50fffff]
pci 0000:00:0a.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:0a.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:10.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x77000000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7fdf0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x1000-0x107f] has been reserved
system 00:00: [io 0x1080-0x10ff] has been reserved
system 00:00: [io 0x1400-0x147f] has been reserved
system 00:00: [io 0x1480-0x14ff] has been reserved
system 00:00: [io 0x1800-0x187f] has been reserved
system 00:00: [io 0x1880-0x18ff] has been reserved
system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:00: [mem 0x77000000-0x7effffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0295] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:0b: [mem 0xe0000000-0xe1ffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x000d2800-0x000d3fff] has been reserved
system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0x7fef0000-0x7fefffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0x7feeffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:10.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:00:0a.0: PCI bridge to [bus 01]
pci 0000:00:0a.0: bridge window [mem 0xe5000000-0xe50fffff]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:01: resource 1 [mem 0xe5000000-0xe50fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
pci 0000:00:10.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19420K (ffff880035a02000 - ffff880036cf9000)
microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1408559582.608:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 3737
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 32 is not supported
ehci-pci 0000:00:04.1: irq 22, io mem 0xe5107000
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:04.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:04.0: irq 23, io mem 0xe5108000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:04.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:454:595
rtc_cmos 00:04: setting system clock to 2014-08-20 18:33:03 UTC (1408559583)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[101]: starting version 204
pata_amd 0000:00:08.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
firewire_ohci 0000:01:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata2: port disabled--ignoring
forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:7d:aa:a0:93
forcedeth 0000:00:0f.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
ahci 0000:00:0e.0: version 3.0
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 20
ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 20
ata5: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 20
ata6: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 20
firewire_core 0000:01:07.0: created device fw0: GUID 00f1c49800001d7d, S400
tsc: Refined TSC clocksource calibration: 1866.666 MHz
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: LPM support broken, forcing max_power
ata3.00: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata3.00: 234441648 sectors, multi 0: LBA48
ata3.00: applying bridge limits
ata3.00: LPM support broken, forcing max_power
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
random: lvm urandom read with 40 bits of entropy available
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
bio: create slab at 1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Switched to clocksource tsc
random: nonblocking pool is initialized
Adding 1966076k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:1966076k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[299]: starting version 204
lp: driver loaded but no devices found
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
it87: Found IT8718F chip at 0x290, revision 4
it87: Beeping is supported
it87 it87.656: Failed to request region 0x295-0x296
it87: probe of it87.656 failed with error -16
ppdev: user-space parallel port driver
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
wmi: Mapper loaded
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
lp0: using parport0 (interrupt-driven).
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
vgaarb: device changed decodes: PCI:0000:00:10.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov 26 21:25:36 PST 2013
type=1400 audit(1408559599.920:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=367 comm="apparmor_parser"
type=1400 audit(1408559599.920:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
type=1400 audit(1408559599.920:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
type=1400 audit(1408559599.920:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=367 comm="apparmor_parser"
type=1400 audit(1408559599.920:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
type=1400 audit(1408559599.920:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=367 comm="apparmor_parser"
type=1400 audit(1408559599.924:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=375 comm="apparmor_parser"
type=1400 audit(1408559599.924:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=375 comm="apparmor_parser"
type=1400 audit(1408559599.924:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=375 comm="apparmor_parser"
type=1400 audit(1408559599.924:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=375 comm="apparmor_parser"
ACPI Warning: \_SB_.PCI0._PRT: Missing expected return value (20131115/nsrepair-216)
ACPI Warning: \_SB_.PCI0._PRT: Expected return object of type Integer/Reference (20131115/nspredef-284)
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
hda-intel 0000:00:09.0: Disabling 64bit DMA
hda-intel 0000:00:09.0: Enable delay in RIRB handling
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
SKU: Nid=0x0 sku_cfg=0x0000e601
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
dig-in=0x1f
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
init: failsafe main process (564) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (660) killed by HUP signal
init: cups main process ended, respawning
input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:09.0/sound/card0/input13
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input12
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:09.0/sound/card0/input11
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:09.0/sound/card0/input10
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:09.0/sound/card0/input9
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input7
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input6
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input5
forcedeth 0000:00:0f.0: irq 43 for MSI/MSI-X
forcedeth 0000:00:0f.0 eth0: MSI enabled
init: plymouth-upstart-bridge main process ended, respawning
init: samba-ad-dc main process (1025) terminated with status 1
init: udev-fallback-graphics main process (1064) terminated with status 1
init: plymouth-splash main process (1082) terminated with status 1
audit_printk_skb: 168 callbacks suppressed
type=1400 audit(1408559628.595:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1668 comm="apparmor_parser"
type=1400 audit(1408559628.595:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1668 comm="apparmor_parser"
type=1400 audit(1408559628.595:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1668 comm="apparmor_parser"
systemd-hostnamed[2695]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
type=1400 audit(1408560373.611:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3779 comm="apparmor_parser"
type=1400 audit(1408560373.611:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3779 comm="apparmor_parser"
type=1400 audit(1408560373.611:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3779 comm="apparmor_parser"
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
perf samples too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
CPU0: Core temperature above threshold, cpu clock throttled (total events = 43766)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 262522)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 750785)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1030852)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1264234)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1471181)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2200452)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2309194)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2418602)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2651618)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2819650)
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature/speed normal